Wraparound extensions in Kent
A wraparound extension in Kent starts with the right design and the right approval route. We take care of both, then build it with our own project management.
- Guide priceFrom £40,000 inc VAT
- PlanningUsually a householder application
- Towns covered23
- Site visitFree, no obligation
Towns in Kent
Is a wraparound extension right for your house?
- Families who want kitchen, dining and living in one space
- Semi-detached houses with a side passage
- Terraced houses that want the largest ground floor possible
The corner is where wraparounds succeed or fail. We usually use a single steel goalpost or a corner post hidden in a pier, and set the glazing so the new room reads as one space rather than two boxes.
Working in Kent
Towns we cover in Kent include Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate, Ashford, Kent, Canterbury. In the South East, plenty of houses have already been extended once, which makes checking the remaining permitted development allowance an important early step.
Planning and approvals in Kent
In England a wraparound extension is assessed as both a side and a rear extension, and the combination usually falls outside permitted development, so most need a householder planning application (£548 from 1 April 2026).
The planning position for a specific Kent address depends on its history and any designations, which is why we check it at the first visit.
Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.
Applications are decided by the local planning authority (your district, borough or unitary council).
What should I budget for a wraparound extension in Kent?
Labour and material costs vary across the UK, so for Kent we use our South East England factor (×1.12). The ranges include VAT and exclude design, structural and council fees.
Typical rates in Kent: £2,240 to £4,140 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| Compact L-shape 18 m² | £40,000 – £48,500 | £46,000 – £58,500 | £58,000 – £75,000 |
| Medium L-shape 25 m² | £56,000 – £67,500 | £64,000 – £81,500 | £81,000 – £104,000 |
| Large L-shape 32 m² | £71,500 – £86,500 | £82,000 – £104,000 | £103,500 – £133,000 |
For a figure based on your own dimensions, use our guide-price tool.
How the project works
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.
Design and approvals
Once the layout is agreed, we deal with the council: planning permission or written confirmation that none is needed, plus building control.
Fixed written price
We confirm the build price in writing, based on the approved drawings and the finishes you have chosen.
Build and sign-off
Our team builds the extension, keeps you updated weekly and finishes with building control sign-off.
Wraparound extension questions answered
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Kent, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
Will my neighbours in Kent be involved?
If a planning application or prior approval is needed, the council notifies neighbours. If the work is on or near a shared boundary, party wall notices may also be needed.
How long does a wraparound extension take to build in Kent?
On site, typically 14 to 20 weeks once approvals are in place. Before that, allow 8–16 weeks design and approvals.
Do wraparound extensions need planning permission?
Usually, yes. In England the side element counts as a side extension and the rear element as a rear extension, and the combination normally falls outside permitted development. A householder application costs £548 in England from 1 April 2026.
How much does a wraparound extension cost?
Our guide range is about £2,240 to £4,140 per m² including VAT. A 25 m² standard-spec wraparound typically lands around £64,000 to £81,500 in Kent before design and council fees.
Book a free site visit in Kent
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.