Utility and boot room extensions in Thame
A utility room extension in Thame starts with the right design and the right approval route. We take care of both, then build it with our own project management.
- Guide price in ThameFrom £15,500 inc VAT
- PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
- Build time6–10 weeks on site
- Postcode districtsOX9
Planning and approvals in Thame
In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.
Homes in conservation areas, national parks, National Landscapes (formerly AONBs), the Broads and World Heritage Sites have tighter rules, so we always check the property's status and planning history before design starts.
Building over or within 3 m of a public sewer needs the water company's consent, usually through a build-over agreement, before the foundations go in.
Applications are decided by the local planning authority (your district, borough or unitary council).
How much does a utility room extension cost in Thame?
These guide figures apply our South East England adjustment (×1.12) to national rates. They include VAT at 20% and cover the build itself; design and council fees are listed separately.
Typical rates in Thame: £2,130 to £3,920 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 2 m × 2.5 m 5 m² | £15,500 – £19,000 | £15,500 – £20,000 | £15,500 – £20,000 |
| 2.5 m × 3.2 m 8 m² | £17,000 – £20,500 | £20,000 – £25,500 | £25,000 – £31,500 |
| 3 m × 3.6 m 11 m² | £23,000 – £28,000 | £27,500 – £34,500 | £34,000 – £43,500 |
Try the guide-price tool to see a range for your own size and finish.
Local to Thame
Postcode districts we cover around Thame include OX9. Nearby, we also take on projects in Oxford (12 miles), Bicester (13 miles), Henley-on-Thames (14 miles), Abingdon (14 miles).
Aylesbury, in Buckinghamshire, is roughly 9 miles from Thame and also on our list. The South East has a broad mix of 1930s semis, post-war estates, newer developments and period cottages, and many houses have enough garden for a generous rear extension.
What we take care of
- Design around appliances, sink and storage
- Back door and a hard-wearing floor
- Waste and water connections
- Ventilation for a tumble dryer
- Built-in storage or space ready for your units
How the project works
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
First, a site visit: we look at the house, garden, access and drains and listen to what you need.
Design and approvals
Once the layout is agreed, we deal with the council: planning permission or written confirmation that none is needed, plus building control.
Fixed written price
We confirm the build price in writing, based on the approved drawings and the finishes you have chosen.
Build and sign-off
The build is managed from start to finish, inspected at each stage and signed off on completion.
Questions people ask about utility room extensions
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Thame, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
How long does a utility room extension take to build in Thame?
On site, typically 6 to 10 weeks once approvals are in place. Before that, allow 4–10 weeks design and approvals.
Do I need building regulations approval in Thame?
Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.
Does a utility extension need planning permission?
Often not, if it is single storey and within permitted development limits. We check this for your property.
How much does a utility room extension cost?
Our guide range is about £2,130 to £3,920 per m² including VAT, with a minimum of around £16,000. An 8 m² standard-spec utility is typically £20,000 to £25,500 in Thame.
Book a free site visit in Thame
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.