Utility and boot room extensions in Oxfordshire
Our design and build teams take on utility room extensions in Oxfordshire, from the first measured survey through planning and building control to the finished room.
- Guide priceFrom £15,500 inc VAT
- PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
- Towns covered10
- Site visitFree, no obligation
What should I budget for a utility room extension in Oxfordshire?
Prices below are for Oxfordshire, using the South East England factor of ×1.12. They are guide ranges including VAT for the build only, not a quote.
Typical rates in Oxfordshire: £2,130 to £3,920 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 2 m × 2.5 m 5 m² | £15,500 – £19,000 | £15,500 – £20,000 | £15,500 – £20,000 |
| 2.5 m × 3.2 m 8 m² | £17,000 – £20,500 | £20,000 – £25,500 | £25,000 – £31,500 |
| 3 m × 3.6 m 11 m² | £23,000 – £28,000 | £27,500 – £34,500 | £34,000 – £43,500 |
For a figure based on your own dimensions, use our guide-price tool.
Will the council need to approve it?
In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.
In a conservation area, national park, National Landscape, the Broads or a World Heritage Site the permitted development limits are tighter (no side or two-storey extensions without an application). Listed homes need listed building consent, and if permitted development rights have been removed, any extension needs an application.
Building over or within 3 m of a public sewer needs the water company's consent, usually through a build-over agreement, before the foundations go in.
If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.
Applications are decided by the local planning authority (your district, borough or unitary council).
Included in a typical project
- Design around appliances, sink and storage
- Built-in storage or space ready for your units
- Waste and water connections
- Back door and a hard-wearing floor
Covering Oxfordshire
Towns we cover in Oxfordshire include Oxford, Banbury, Abingdon, Bicester, Didcot, Witney, Thame, Henley-on-Thames. Homes across the South East range from Victorian terraces in the older town centres to large detached houses on the edges, so the right extension type varies street by street.
Our process, step by step
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
It starts with a visit to your house to measure, check access and talk through ideas and budget.
Design and approvals
Drawings are prepared and agreed with you, then submitted for the right planning route and building regulations approval.
Fixed written price
We confirm the build price in writing, based on the approved drawings and the finishes you have chosen.
Build and sign-off
Our team builds the extension, keeps you updated weekly and finishes with building control sign-off.
Questions people ask about utility room extensions
How long does a utility room extension take to build in Oxfordshire?
On site, typically 6 to 10 weeks once approvals are in place. Before that, allow 4–10 weeks design and approvals.
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Oxfordshire, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
Do you cover all of Oxfordshire?
Yes, across the whole of Oxfordshire. Site visits are free and there is no obligation.
Can a utility have a toilet?
Yes, space permitting. A WC needs drainage and extraction, which we plan into the design.
How much does a utility room extension cost?
Our guide range is about £2,130 to £3,920 per m² including VAT, with a minimum of around £16,000. An 8 m² standard-spec utility is typically £20,000 to £25,500 in Oxfordshire.
Book a free site visit in Oxfordshire
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.