Utility and boot room extensions across Slough
A utility room extension in Slough starts with the right design and the right approval route. We take care of both, then build it with our own project management.
- Guide price in SloughFrom £15,500 inc VAT
- PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
- Build time6–10 weeks on site
- Postcode districtsSL1, SL2, SL3, SL4
What we take care of
- Ventilation for a tumble dryer
- Back door and a hard-wearing floor
- Built-in storage or space ready for your units
- Design around appliances, sink and storage
- Waste and water connections
A good utility works like a back-of-house corridor: in from the garden, boots off, coats on hooks, washing on the way through. We plan the door positions so it doesn't become another room to walk around.
Will the council need to approve it?
In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.
Before any drawing is finalised we check whether the house is listed, in a conservation area or subject to an Article 4 direction.
If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.
Building over or within 3 m of a public sewer needs the water company's consent, usually through a build-over agreement, before the foundations go in.
Applications are decided by the local planning authority (your district, borough or unitary council).
Utility room extension prices in Slough
Prices below are for Slough, using the South East England factor of ×1.12. They are guide ranges including VAT for the build only, not a quote.
Typical rates in Slough: £2,130 to £3,920 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 2 m × 2.5 m 5 m² | £15,500 – £19,000 | £15,500 – £20,000 | £15,500 – £20,000 |
| 2.5 m × 3.2 m 8 m² | £17,000 – £20,500 | £20,000 – £25,500 | £25,000 – £31,500 |
| 3 m × 3.6 m 11 m² | £23,000 – £28,000 | £27,500 – £34,500 | £34,000 – £43,500 |
For a figure based on your own dimensions, use our guide-price tool.
Extensions in and around Slough
We cover Slough and the postcode districts SL1, SL2, SL3, SL4. We also work in nearby Windsor (2 miles), Maidenhead (5 miles), Bracknell (9 miles), Wokingham (12 miles).
For homes towards Buckinghamshire, Gerrards Cross is around 6 miles away. Homes across the South East range from Victorian terraces in the older town centres to large detached houses on the edges, so the right extension type varies street by street.
How the project works
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.
Design and approvals
We produce the drawings and structural design, and manage the approvals so they are in place before work starts.
Fixed written price
You receive a written, itemised price and programme. Nothing starts until you are happy with it.
Build and sign-off
We build it with one project manager, book the building control inspections and hand over the completion certificate.
Your questions about a utility room extension in Slough
Do I need building regulations approval in Slough?
Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.
Do you cover all of Slough?
Yes. We cover Slough and the surrounding parts of Berkshire. Site visits are free and there is no obligation.
Who do I contract with for a utility room extension in Slough?
Your contract is with S&K Property Investments and Improvement Ltd, which designs and manages the project and the build teams who carry it out.
Does a utility extension need planning permission?
Often not, if it is single storey and within permitted development limits. We check this for your property.
How much does a utility room extension cost?
Our guide range is about £2,130 to £3,920 per m² including VAT, with a minimum of around £16,000. An 8 m² standard-spec utility is typically £20,000 to £25,500 in Slough.
Book a free site visit in Slough
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.