Utility and boot room extensions for homes in Kenilworth
Planning a utility room extension in Kenilworth? We survey the house, work out the planning route, draw the design and build it, so you deal with one team from the first visit to the completion certificate.
- Guide price in KenilworthFrom £13,500 inc VAT
- PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
- Build time6–10 weeks on site
- Postcode districtsCV8
Local to Kenilworth
Across CV8, we can visit, measure and advise. Nearby, we also take on projects in Warwick (5 miles), Leamington Spa (5 miles), Bedworth (10 miles), Stratford-upon-Avon (12 miles).
For homes towards West Midlands, Coventry is around 5 miles away. Across the West Midlands, brick-built semis with long gardens are common, so single-storey and two-storey rear extensions are popular choices.
What is included
- Back door and a hard-wearing floor
- Design around appliances, sink and storage
- Waste and water connections
- Built-in storage or space ready for your units
- Ventilation for a tumble dryer
Will the council need to approve it?
In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.
In a conservation area, national park, National Landscape, the Broads or a World Heritage Site the permitted development limits are tighter (no side or two-storey extensions without an application). Listed homes need listed building consent, and if permitted development rights have been removed, any extension needs an application.
Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.
If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.
Applications are decided by the local planning authority (your district, borough or unitary council).
Guide prices for Kenilworth
Prices below are for Kenilworth, using the West Midlands factor of ×0.97. They are guide ranges including VAT for the build only, not a quote.
Typical rates in Kenilworth: £1,840 to £3,400 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 2 m × 2.5 m 5 m² | £13,500 – £16,500 | £13,500 – £17,000 | £13,500 – £17,000 |
| 2.5 m × 3.2 m 8 m² | £14,500 – £17,500 | £17,000 – £22,000 | £21,500 – £27,500 |
| 3 m × 3.6 m 11 m² | £20,000 – £24,500 | £24,000 – £30,000 | £29,500 – £37,500 |
Try the guide-price tool to see a range for your own size and finish.
Our process, step by step
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
It starts with a visit to your house to measure, check access and talk through ideas and budget.
Design and approvals
Drawings are prepared and agreed with you, then submitted for the right planning route and building regulations approval.
Fixed written price
We confirm the build price in writing, based on the approved drawings and the finishes you have chosen.
Build and sign-off
Work is carried out to the agreed programme, inspected by building control and signed off at the end.
Questions people ask about utility room extensions
Do you cover all of Kenilworth?
Yes. We cover Kenilworth and the surrounding parts of Warwickshire. Site visits are free and there is no obligation.
How long does a utility room extension take to build in Kenilworth?
On site, typically 6 to 10 weeks once approvals are in place. Before that, allow 4–10 weeks design and approvals.
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Kenilworth, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
How much does a utility room extension cost?
Our guide range is about £1,840 to £3,400 per m² including VAT, with a minimum of around £14,000. An 8 m² standard-spec utility is typically £17,000 to £22,000 in Kenilworth.
Does a utility extension need planning permission?
Often not, if it is single storey and within permitted development limits. We check this for your property.
Book a free site visit in Kenilworth
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.