Side return extensions across Derby
We design and build side return extensions for houses in Derby, with a written price once the survey and design are done and one point of contact throughout.
- Guide price in DerbyFrom £17,000 inc VAT
- PlanningOften permitted development; party wall notice usual
- Build time10–14 weeks on site
- Postcode districtsDE1, DE3, DE21, DE22, DE23
Extensions in and around Derby
Across DE1, DE3, DE21, DE22, DE23, DE24, we can visit, measure and advise. The same team covers Belper (7 miles), Ilkeston (8 miles), Heanor (8 miles), Ripley (8 miles), all within easy reach.
For homes towards Nottinghamshire, Eastwood is around 9 miles away. The East Midlands has plenty of inter-war and post-war semis and detached houses with room to extend, alongside Victorian terraces in the towns.
Planning rules that apply in Derby
In England a single-storey side return infill is often permitted development if it stays within the height limits and is no wider than half the width of the original house. Conservation areas, listed buildings and flats always need an application, and the boundary wall usually brings in the Party Wall Act.
Homes in conservation areas, national parks, National Landscapes (formerly AONBs), the Broads and World Heritage Sites have tighter rules, so we always check the property's status and planning history before design starts.
Building over or within 3 m of a public sewer needs the water company's consent, usually through a build-over agreement, before the foundations go in.
If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.
Applications are decided by the local planning authority (your district, borough or unitary council).
What we take care of
- Survey of the outrigger, boundary wall and drainage
- Removal of the side wall and new steelwork
- Glazed, sloping or flat roof with rooflights
- Kitchen-ready shell or full finish
- New boundary wall or raised party wall
- Party wall notice support (England and Wales)
What should I budget for a side return extension in Derby?
For Derby we adjust our national guide rates by ×0.95, the factor we use for East Midlands. Figures include VAT; your written quote after the survey replaces them.
Typical rates in Derby: £2,000 to £3,610 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 1.8 m × 4.5 m 8 m² | £17,000 – £20,500 | £18,000 – £23,000 | £22,500 – £29,000 |
| 2 m × 5.5 m 11 m² | £21,500 – £26,500 | £25,000 – £31,500 | £31,000 – £40,000 |
| 2.2 m × 7 m 15 m² | £29,500 – £36,000 | £34,000 – £43,000 | £42,500 – £54,500 |
Want a range for your exact size? The guide-price tool takes about a minute.
From first visit to completion
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.
Design and approvals
Drawings are prepared and agreed with you, then submitted for the right planning route and building regulations approval.
Fixed written price
We confirm the build price in writing, based on the approved drawings and the finishes you have chosen.
Build and sign-off
Work is carried out to the agreed programme, inspected by building control and signed off at the end.
Side return extension questions answered
Will my neighbours in Derby be involved?
If a planning application or prior approval is needed, the council notifies neighbours. If the work is on or near a shared boundary, party wall notices may also be needed.
Do I need building regulations approval in Derby?
Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Derby, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
How much does a side return extension cost?
Our guide range is about £2,000 to £3,610 per m² including VAT, so a typical 2 m × 5.5 m infill lands around £25,000 to £31,500 at standard spec in Derby, more in London.
Will the kitchen be darker?
Not if the roof is designed well. A glazed roof or a line of rooflights along the boundary usually makes the room brighter than before.
Book a free site visit in Derby
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.