house-extension.uk

Flat roof extensions for homes in Edmonton

From the first sketch to final sign-off, we plan and build flat roof extensions in Edmonton and the surrounding Greater London area.

  • Guide price in EdmontonFrom £27,000 inc VAT
  • PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
  • Build time10–16 weeks on site
  • Postcode districtsEN1, N9, N13, N17, N18
Flat roof of an extension with a membrane finish, a roof lantern and flat rooflights

What should I budget for a flat roof extension in Edmonton?

Labour and material costs vary across the UK, so for Edmonton we use our London factor (×1.3). The ranges include VAT and exclude design, structural and council fees.

Typical rates in Edmonton: £2,280 to £4,360 per m² including VAT, depending on specification.

SizeEssentialStandardPremium
3 m × 4 m
12 m²
£27,000 – £32,000£31,500 – £41,000£40,500 – £52,500
4 m × 5 m
20 m²
£45,500 – £53,500£53,000 – £68,000£67,500 – £87,500
5 m × 6 m
30 m²
£68,000 – £80,000£79,500 – £101,500£101,000 – £131,000

For a figure based on your own dimensions, use our guide-price tool.

What we take care of

  • Falls and outlets designed to drain properly
  • Lanterns or rooflights with upstands
  • Parapets or edge trims and flashings to the house
  • Membrane choice: single-ply, EPDM or GRP

Height is often what decides a flat roof. Under first-floor windows, a pitched roof may not fit at all; a flat roof keeps the extension low while still giving a good ceiling height inside.

Working in Edmonton

Our survey diary covers Edmonton, including EN1, N9, N13, N17, N18, N21. Neighbouring towns we cover include Ponders End (1 mile), Tottenham (2 miles), Enfield (2 miles), Palmers Green (2 miles).

For homes towards Essex, Waltham Abbey is around 5 miles away. London's housing is dominated by Victorian and Edwardian terraces, many with a rear outrigger and a side return, and 1930s semis in the outer boroughs. Conservation areas are common, so the planning check comes first.

Planning and approvals in Edmonton

In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.

In a conservation area, national park, National Landscape, the Broads or a World Heritage Site the permitted development limits are tighter (no side or two-storey extensions without an application). Listed homes need listed building consent, and if permitted development rights have been removed, any extension needs an application.

Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.

Applications are decided by the local planning authority (your district, borough or unitary council).

What happens next

Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.

  1. Free site visit

    A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.

  2. Design and approvals

    Once the layout is agreed, we deal with the council: planning permission or written confirmation that none is needed, plus building control.

  3. Fixed written price

    With the design and specification agreed, you get a fixed written price and a start date.

  4. Build and sign-off

    We build it with one project manager, book the building control inspections and hand over the completion certificate.

Your questions about a flat roof extension in Edmonton

Do I need building regulations approval in Edmonton?

Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.

Who do I contract with for a flat roof extension in Edmonton?

Your contract is with S&K Property Investments and Improvement Ltd, which designs and manages the project and the build teams who carry it out.

Do you cover all of Edmonton?

Yes. We cover Edmonton and the surrounding parts of Greater London. Site visits are free and there is no obligation.

Can I walk on a flat roof extension?

Only for maintenance unless it is designed as a terrace. A roof terrace or balcony needs planning permission and a different structure.

Are flat roof extensions cheaper?

Usually slightly, because there is less roof structure and no tiles. Our guide range is about £2,280 to £4,360 per m² including VAT.

Book a free site visit in Edmonton

We will measure up, check the planning position and give you honest guide figures.

  • Free, no-obligation site visit
  • Planning route checked before you spend on drawings
  • Written price once the design is agreed
  • Building control sign-off at the end

Prefer to talk? Call 0800 088 6341 or .

Book a free site visit

Tell us a little about the project and we will arrange a time.

Please enter a valid UK postcode.
Please choose an option.
Please enter your name.
Please enter a phone number.
Please enter a valid email.

We use your details only to reply to this enquiry and prepare your quote. Privacy notice.

Call usGet a quote