Wraparound extensions in Cumbria
Planning a wraparound extension in Cumbria? We survey the house, work out the planning route, draw the design and build it, so you deal with one team from the first visit to the completion certificate.
- Guide priceFrom £34,000 inc VAT
- PlanningUsually a householder application
- Towns covered7
- Site visitFree, no obligation
Who a wraparound extension suits
- Terraced houses that want the largest ground floor possible
- Families who want kitchen, dining and living in one space
- Semi-detached houses with a side passage
The corner is where wraparounds succeed or fail. We usually use a single steel goalpost or a corner post hidden in a pier, and set the glazing so the new room reads as one space rather than two boxes.
Covering Cumbria
Towns we cover in Cumbria include Carlisle, Barrow-in-Furness, Kendal, Whitehaven, Workington, Penrith, Ulverston. Across the North West, terraced houses with small rear yards suit compact rear and side return extensions, while suburban semis have room for more.
Planning and approvals in Cumbria
In England a wraparound extension is assessed as both a side and a rear extension, and the combination usually falls outside permitted development, so most need a householder planning application (£548 from 1 April 2026).
Homes in conservation areas, national parks, National Landscapes (formerly AONBs), the Broads and World Heritage Sites have tighter rules, so we always check the property's status and planning history before design starts.
If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.
Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.
Applications are decided by the local planning authority (your district, borough or unitary council).
How much does a wraparound extension cost in Cumbria?
Labour and material costs vary across the UK, so for Cumbria we use our North West England factor (×0.95). The ranges include VAT and exclude design, structural and council fees.
Typical rates in Cumbria: £1,900 to £3,520 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| Compact L-shape 18 m² | £34,000 – £41,500 | £39,000 – £50,000 | £49,500 – £63,500 |
| Medium L-shape 25 m² | £47,500 – £57,000 | £54,500 – £69,000 | £68,500 – £88,000 |
| Large L-shape 32 m² | £60,500 – £73,000 | £69,500 – £88,500 | £88,000 – £112,500 |
For a figure based on your own dimensions, use our guide-price tool.
From first visit to completion
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.
Design and approvals
Drawings are prepared and agreed with you, then submitted for the right planning route and building regulations approval.
Fixed written price
You receive a written, itemised price and programme. Nothing starts until you are happy with it.
Build and sign-off
Work is carried out to the agreed programme, inspected by building control and signed off at the end.
Questions people ask about wraparound extensions
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Cumbria, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
Do you cover all of Cumbria?
Yes, across the whole of Cumbria. Site visits are free and there is no obligation.
Do I need building regulations approval in Cumbria?
Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.
How much does a wraparound extension cost?
Our guide range is about £1,900 to £3,520 per m² including VAT. A 25 m² standard-spec wraparound typically lands around £54,500 to £69,000 in Cumbria before design and council fees.
Do wraparound extensions need planning permission?
Usually, yes. In England the side element counts as a side extension and the rear element as a rear extension, and the combination normally falls outside permitted development. A householder application costs £548 in England from 1 April 2026.
Book a free site visit in Cumbria
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.