Utility and boot room extensions in Ferndown: design, approvals and build
Thinking about a utility room extension for your Ferndown home? Start with a free site visit: we measure up, check what the council will allow and give you honest guide figures on the day.
- Guide price in FerndownFrom £14,000 inc VAT
- PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
- Build time6–10 weeks on site
- Postcode districtsBH22
What should I budget for a utility room extension in Ferndown?
Labour and material costs vary across the UK, so for Ferndown we use our South West England factor (×1.02). The ranges include VAT and exclude design, structural and council fees.
Typical rates in Ferndown: £1,940 to £3,570 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 2 m × 2.5 m 5 m² | £14,000 – £17,000 | £14,000 – £18,000 | £14,000 – £18,000 |
| 2.5 m × 3.2 m 8 m² | £15,500 – £18,500 | £18,000 – £23,000 | £22,500 – £29,000 |
| 3 m × 3.6 m 11 m² | £21,000 – £25,500 | £25,000 – £31,500 | £31,000 – £39,500 |
Want a range for your exact size? The guide-price tool takes about a minute.
Will the council need to approve it?
In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.
Before any drawing is finalised we check whether the house is listed, in a conservation area or subject to an Article 4 direction.
If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.
Applications are decided by the local planning authority (your district, borough or unitary council).
What is included
- Design around appliances, sink and storage
- Ventilation for a tumble dryer
- Back door and a hard-wearing floor
- Waste and water connections
- Built-in storage or space ready for your units
A good utility works like a back-of-house corridor: in from the garden, boots off, coats on hooks, washing on the way through. We plan the door positions so it doesn't become another room to walk around.
Local to Ferndown
Across BH22, we can visit, measure and advise. The same team covers Wimborne Minster (4 miles), Bournemouth (6 miles), Christchurch (7 miles), Poole (8 miles), all within easy reach.
Just over the Hampshire border, New Milton is about 10 miles away. South West homes range from terraced streets in the cities to stone cottages and bungalows in the countryside, and conservation areas are common in historic centres.
Our process, step by step
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.
Design and approvals
Drawings are prepared and agreed with you, then submitted for the right planning route and building regulations approval.
Fixed written price
The price is fixed in writing once the design is settled, with a clear programme and payment stages.
Build and sign-off
Our team builds the extension, keeps you updated weekly and finishes with building control sign-off.
Questions people ask about utility room extensions
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Ferndown, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
Who do I contract with for a utility room extension in Ferndown?
Your contract is with S&K Property Investments and Improvement Ltd, which designs and manages the project and the build teams who carry it out.
How long does a utility room extension take to build in Ferndown?
On site, typically 6 to 10 weeks once approvals are in place. Before that, allow 4–10 weeks design and approvals.
Can a utility have a toilet?
Yes, space permitting. A WC needs drainage and extraction, which we plan into the design.
How much does a utility room extension cost?
Our guide range is about £1,940 to £3,570 per m² including VAT, with a minimum of around £14,500. An 8 m² standard-spec utility is typically £18,000 to £23,000 in Ferndown.
Book a free site visit in Ferndown
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.