Timber frame extensions across Farnborough
Thinking about a timber frame extension for your Farnborough home? Start with a free site visit: we measure up, check what the council will allow and give you honest guide figures on the day.
- Guide price in FarnboroughFrom £23,500 inc VAT
- PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
- Build time8–14 weeks on site
- Postcode districtsGU11, GU14, GU17
Planning rules that apply in Farnborough
In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.
The planning position for a specific Farnborough address depends on its history and any designations, which is why we check it at the first visit.
Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.
If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.
Applications are decided by the local planning authority (your district, borough or unitary council).
What we take care of
- Frame design and structural calculations
- Fire and acoustic details where needed
- Foundations, often lighter than masonry
- Breathable wall build-up with insulation
- Cladding, render or brick slip finish
How much does a timber frame extension cost in Farnborough?
For Farnborough we adjust our national guide rates by ×1.12, the factor we use for South East England. Figures include VAT; your written quote after the survey replaces them.
Typical rates in Farnborough: £1,960 to £3,810 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 3 m × 4 m 12 m² | £23,500 – £28,500 | £27,500 – £36,000 | £34,500 – £46,000 |
| 4 m × 5 m 20 m² | £39,000 – £47,500 | £45,500 – £59,500 | £58,000 – £76,500 |
| 5 m × 6 m 30 m² | £58,500 – £71,000 | £68,500 – £89,500 | £87,000 – £114,500 |
For a figure based on your own dimensions, use our guide-price tool.
Extensions in and around Farnborough
Across GU11, GU14, GU17, we can visit, measure and advise. Nearby, we also take on projects in Aldershot (3 miles), Fleet (3 miles), Yateley (5 miles), Bordon (13 miles).
Just over the Surrey border, Camberley is about 3 miles away. In the South East, plenty of houses have already been extended once, which makes checking the remaining permitted development allowance an important early step.
How the project works
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
It starts with a visit to your house to measure, check access and talk through ideas and budget.
Design and approvals
Drawings are prepared and agreed with you, then submitted for the right planning route and building regulations approval.
Fixed written price
We confirm the build price in writing, based on the approved drawings and the finishes you have chosen.
Build and sign-off
Work is carried out to the agreed programme, inspected by building control and signed off at the end.
Common questions in Farnborough
Will my neighbours in Farnborough be involved?
If a planning application or prior approval is needed, the council notifies neighbours. If the work is on or near a shared boundary, party wall notices may also be needed.
How long does a timber frame extension take to build in Farnborough?
On site, typically 8 to 14 weeks once approvals are in place. Before that, allow 4–12 weeks design and approvals.
Do you cover all of Farnborough?
Yes. We cover Farnborough and the surrounding parts of Hampshire. Site visits are free and there is no obligation.
Is timber frame cheaper than brick?
It is similar overall. The frame can save time on site, but the cladding choice has a big effect on cost. Our guide range is about £1,960 to £3,810 per m² including VAT.
Does a timber frame extension need planning permission?
The same planning rules apply as for any extension. If the cladding looks different from the house, permitted development’s matching-materials condition may mean an application is needed.
Book a free site visit in Farnborough
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.