Timber frame extensions across Blackwood
Thinking about a timber frame extension for your Blackwood home? Start with a free site visit: we measure up, check what the council will allow and give you honest guide figures on the day.
- Guide price in BlackwoodFrom £19,500 inc VAT
- PlanningWelsh permitted development rules (rear up to 4 m)
- Build time8–14 weeks on site
- Postcode districtsCF82, NP12
What we take care of
- Frame design and structural calculations
- Breathable wall build-up with insulation
- Fire and acoustic details where needed
- Cladding, render or brick slip finish
- Foundations, often lighter than masonry
Moisture is the enemy of any timber building. We design ventilated cladding cavities, breather membranes and a proper damp-proof course height, and keep the frame dry during construction.
Will the council need to approve it?
In Wales a single-storey rear extension can usually project up to 4 m beyond the rear wall without a planning application, if it is no more than 4 m high, keeps eaves to 3 m and overall height to 4 m within 2 m of a boundary, and covers no more than half the land around the original house. Wales has no larger home extension prior approval scheme.
Before any drawing is finalised we check whether the house is listed, in a conservation area or subject to an Article 4 direction.
The Party Wall etc. Act 1996 applies in Wales as in England: notice must be served before work to a shared wall, building on the boundary, or excavating close to a neighbour's foundations.
Applications are decided by the local planning authority (your county or county borough council, or the national park authority).
How much does a timber frame extension cost in Blackwood?
For Blackwood we adjust our national guide rates by ×0.93, the factor we use for Wales. Figures include VAT; your written quote after the survey replaces them.
Typical rates in Blackwood: £1,630 to £3,160 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 3 m × 4 m 12 m² | £19,500 – £23,500 | £22,500 – £30,000 | £29,000 – £38,000 |
| 4 m × 5 m 20 m² | £32,500 – £39,500 | £38,000 – £49,500 | £48,000 – £63,500 |
| 5 m × 6 m 30 m² | £48,500 – £59,000 | £57,000 – £74,000 | £72,500 – £95,000 |
For a figure based on your own dimensions, use our guide-price tool.
Local to Blackwood
Across CF82, NP12, we can visit, measure and advise. The same team covers Gelligaer (2 miles), Risca (6 miles), Caerphilly (6 miles), Pontypridd (7 miles), all within easy reach.
In Wales, terraced houses with rear offshoots are common in the towns, while detached houses and bungalows dominate in rural areas.
What happens next
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
It starts with a visit to your house to measure, check access and talk through ideas and budget.
Design and approvals
We produce the drawings and structural design, and manage the approvals so they are in place before work starts.
Fixed written price
The price is fixed in writing once the design is settled, with a clear programme and payment stages.
Build and sign-off
The build is managed from start to finish, inspected at each stage and signed off on completion.
Timber frame extension questions answered
How long does a timber frame extension take to build in Blackwood?
On site, typically 8 to 14 weeks once approvals are in place. Before that, allow 4–12 weeks design and approvals.
Will my neighbours in Blackwood be involved?
If a planning application is needed, the council notifies neighbours. If the work is on or near a shared boundary, party wall notices may also be needed.
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Blackwood, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
Is timber frame cheaper than brick?
It is similar overall. The frame can save time on site, but the cladding choice has a big effect on cost. Our guide range is about £1,630 to £3,160 per m² including VAT.
Does a timber frame extension need planning permission?
The same planning rules apply as for any extension. If the cladding looks different from the house, permitted development’s matching-materials condition may mean an application is needed.
Book a free site visit in Blackwood
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.