house-extension.uk

Single-storey rear extensions in Bridgwater

Planning a single-storey extension in Bridgwater? We survey the house, work out the planning route, draw the design and build it, so you deal with one team from the first visit to the completion certificate.

  • Guide price in BridgwaterFrom £21,000 inc VAT
  • PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
  • Build time10–16 weeks on site
  • Postcode districtsTA6
Single-storey rear extension in matching brick with a roof lantern and sliding doors

What we take care of

  • Flat or pitched roof, rooflights or lantern
  • Walls, steel beams and the new opening into the house
  • Measured survey and design
  • Foundations, drainage and groundworks

Depth is the big decision. Every extra metre adds floor area but also takes garden and can push you out of permitted development. We draw the room at two or three depths so you can see the trade-off in space, light and cost before anything is fixed.

Working in Bridgwater

Across TA6, we can visit, measure and advise. Nearby, we also take on projects in Burnham-on-Sea (8 miles), Taunton (9 miles), Weston-super-Mare (15 miles), Yeovil (21 miles).

South West homes range from terraced streets in the cities to stone cottages and bungalows in the countryside, and conservation areas are common in historic centres.

Single-storey extension prices in Bridgwater

Labour and material costs vary across the UK, so for Bridgwater we use our South West England factor (×1.02). The ranges include VAT and exclude design, structural and council fees.

Typical rates in Bridgwater: £1,780 to £3,470 per m² including VAT, depending on specification.

SizeEssentialStandardPremium
3 m × 4 m
12 m²
£21,000 – £25,500£25,000 – £32,000£31,500 – £42,000
4 m × 5 m
20 m²
£35,500 – £42,000£41,500 – £53,500£53,000 – £69,500
5 m × 6 m
30 m²
£53,500 – £63,000£62,500 – £80,000£79,500 – £104,500

Try the guide-price tool to see a range for your own size and finish.

Planning and approvals in Bridgwater

In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.

Homes in conservation areas, national parks, National Landscapes (formerly AONBs), the Broads and World Heritage Sites have tighter rules, so we always check the property's status and planning history before design starts.

Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.

If the work involves a shared wall, building on the boundary, or digging foundations within 3 m (sometimes 6 m) of a neighbour's building, the Party Wall etc. Act 1996 applies and notice must be served before work starts: two months for work to a party wall, one month for new walls on the boundary and for excavations.

Applications are decided by the local planning authority (your district, borough or unitary council).

From first visit to completion

Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.

  1. Free site visit

    We visit your Bridgwater home, measure up, talk through what you want and check the planning position.

  2. Design and approvals

    Drawings are prepared and agreed with you, then submitted for the right planning route and building regulations approval.

  3. Fixed written price

    You receive a written, itemised price and programme. Nothing starts until you are happy with it.

  4. Build and sign-off

    The build is managed from start to finish, inspected at each stage and signed off on completion.

Common questions in Bridgwater

Can I see a price before committing to anything?

Yes. The guide prices on this page are adjusted for Bridgwater, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.

Do you cover all of Bridgwater?

Yes. We cover Bridgwater and the surrounding parts of Somerset. Site visits are free and there is no obligation.

Do I need building regulations approval in Bridgwater?

Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.

Will I need a steel beam?

Almost always. Opening up the rear wall to join the new room to the house needs a beam, usually steel, sized by a structural engineer. It is included in our quotes.

Flat roof or pitched roof?

Flat roofs give more headroom inside and suit lanterns and rooflights; pitched roofs can blend better with older houses. Both meet building regulations when built properly. See our flat roof and pitched roof pages for the details.

Book a free site visit in Bridgwater

We will measure up, check the planning position and give you honest guide figures.

  • Free, no-obligation site visit
  • Planning route checked before you spend on drawings
  • Written price once the design is agreed
  • Building control sign-off at the end

Prefer to talk? Call 0800 088 6341 or .

Book a free site visit

Tell us a little about the project and we will arrange a time.

Please enter a valid UK postcode.
Please choose an option.
Please enter your name.
Please enter a phone number.
Please enter a valid email.

We use your details only to reply to this enquiry and prepare your quote. Privacy notice.

Call usGet a quote