Side return extensions in Burgess Hill: design, approvals and build
Burgess Hill homeowners can use us for the whole side return extension project: survey, design, planning or permitted development checks, building regulations and the build itself.
- Guide price in Burgess HillFrom £20,000 inc VAT
- PlanningOften permitted development; party wall notice usual
- Build time10–14 weeks on site
- Postcode districtsBN6, RH15
Planning rules that apply in Burgess Hill
In England a single-storey side return infill is often permitted development if it stays within the height limits and is no wider than half the width of the original house. Conservation areas, listed buildings and flats always need an application, and the boundary wall usually brings in the Party Wall Act.
The planning position for a specific Burgess Hill address depends on its history and any designations, which is why we check it at the first visit.
Building over or within 3 m of a public sewer needs the water company's consent, usually through a build-over agreement, before the foundations go in.
Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.
Applications are decided by the local planning authority (your district, borough or unitary council).
Covering Burgess Hill
Our survey diary covers Burgess Hill, including BN6, RH15. Neighbouring towns we cover include Haywards Heath (3 miles), Shoreham-by-Sea (11 miles), Crawley (11 miles), Horsham (11 miles).
Just over the East Sussex border, Portslade is about 9 miles away. The South East has a broad mix of 1930s semis, post-war estates, newer developments and period cottages, and many houses have enough garden for a generous rear extension.
Side return extension prices in Burgess Hill
Labour and material costs vary across the UK, so for Burgess Hill we use our South East England factor (×1.12). The ranges include VAT and exclude design, structural and council fees.
Typical rates in Burgess Hill: £2,350 to £4,260 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 1.8 m × 4.5 m 8 m² | £20,000 – £24,000 | £21,500 – £27,000 | £26,500 – £34,500 |
| 2 m × 5.5 m 11 m² | £25,500 – £31,000 | £29,500 – £37,000 | £36,500 – £47,000 |
| 2.2 m × 7 m 15 m² | £35,000 – £42,500 | £40,000 – £50,500 | £50,000 – £64,000 |
For a figure based on your own dimensions, use our guide-price tool.
When a side return extension makes sense
- Victorian and Edwardian terraces with a rear outrigger
- Homes where the garden is too small to lose much depth
- Narrow galley kitchens
From first visit to completion
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.
Design and approvals
We draw the design, agree it with you and handle planning or permitted development checks and building regulations.
Fixed written price
With the design and specification agreed, you get a fixed written price and a start date.
Build and sign-off
The build is managed from start to finish, inspected at each stage and signed off on completion.
Questions people ask about side return extensions
How long does a side return extension take to build in Burgess Hill?
On site, typically 10 to 14 weeks once approvals are in place. Before that, allow 6–12 weeks design and approvals.
Do I need building regulations approval in Burgess Hill?
Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.
Can I see a price before committing to anything?
Yes. The guide prices on this page are adjusted for Burgess Hill, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.
Do side return extensions need planning permission?
In England many single-storey side returns fit within permitted development if they stay within the height limits and are no wider than half the width of the original house. Conservation areas, listed buildings and flats need an application. Other UK nations have their own rules, which we check.
How much does a side return extension cost?
Our guide range is about £2,350 to £4,260 per m² including VAT, so a typical 2 m × 5.5 m infill lands around £29,500 to £37,000 at standard spec in Burgess Hill, more in London.
Book a free site visit in Burgess Hill
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.