Side return extensions for homes in Bedfordshire
A side return extension in Bedfordshire starts with the right design and the right approval route. We take care of both, then build it with our own project management.
- Guide priceFrom £19,000 inc VAT
- PlanningOften permitted development; party wall notice usual
- Towns covered6
- Site visitFree, no obligation
Local to Bedfordshire
Towns we cover in Bedfordshire include Luton, Bedford, Dunstable, Leighton Buzzard, Ampthill, Kempston. Across the East of England many houses sit on generous plots, and single-storey and wraparound extensions are a natural fit.
When a side return extension makes sense
- Narrow galley kitchens
- Homes where the garden is too small to lose much depth
- Victorian and Edwardian terraces with a rear outrigger
Light is the design problem. A side return can make the middle of the house darker if the roof is solid, so we model the daylight and usually recommend a glazed slope or a run of rooflights along the boundary edge.
Planning and approvals in Bedfordshire
In England a single-storey side return infill is often permitted development if it stays within the height limits and is no wider than half the width of the original house. Conservation areas, listed buildings and flats always need an application, and the boundary wall usually brings in the Party Wall Act.
Homes in conservation areas, national parks, National Landscapes (formerly AONBs), the Broads and World Heritage Sites have tighter rules, so we always check the property's status and planning history before design starts.
Building over or within 3 m of a public sewer needs the water company's consent, usually through a build-over agreement, before the foundations go in.
Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.
Applications are decided by the local planning authority (your district, borough or unitary council).
How much does a side return extension cost in Bedfordshire?
For Bedfordshire we adjust our national guide rates by ×1.06, the factor we use for East of England. Figures include VAT; your written quote after the survey replaces them.
Typical rates in Bedfordshire: £2,230 to £4,030 per m² including VAT, depending on specification.
| Size | Essential | Standard | Premium |
|---|---|---|---|
| 1.8 m × 4.5 m 8 m² | £19,000 – £23,000 | £20,000 – £25,500 | £25,000 – £32,500 |
| 2 m × 5.5 m 11 m² | £24,000 – £29,500 | £27,500 – £35,000 | £34,500 – £44,500 |
| 2.2 m × 7 m 15 m² | £33,000 – £40,000 | £38,000 – £48,000 | £47,500 – £60,500 |
For a figure based on your own dimensions, use our guide-price tool.
How the project works
Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.
Free site visit
It starts with a visit to your house to measure, check access and talk through ideas and budget.
Design and approvals
Once the layout is agreed, we deal with the council: planning permission or written confirmation that none is needed, plus building control.
Fixed written price
We confirm the build price in writing, based on the approved drawings and the finishes you have chosen.
Build and sign-off
The build is managed from start to finish, inspected at each stage and signed off on completion.
Common questions in Bedfordshire
Will my neighbours in Bedfordshire be involved?
If a planning application or prior approval is needed, the council notifies neighbours. If the work is on or near a shared boundary, party wall notices may also be needed.
Do I need building regulations approval in Bedfordshire?
Yes. Almost every extension needs it, whatever the planning route. We prepare the drawings and book the inspections.
Do you cover all of Bedfordshire?
Yes, across the whole of Bedfordshire. Site visits are free and there is no obligation.
Do side return extensions need planning permission?
In England many single-storey side returns fit within permitted development if they stay within the height limits and are no wider than half the width of the original house. Conservation areas, listed buildings and flats need an application. Other UK nations have their own rules, which we check.
How much does a side return extension cost?
Our guide range is about £2,230 to £4,030 per m² including VAT, so a typical 2 m × 5.5 m infill lands around £27,500 to £35,000 at standard spec in Bedfordshire, more in London.
Book a free site visit in Bedfordshire
We will measure up, check the planning position and give you honest guide figures.
- Free, no-obligation site visit
- Planning route checked before you spend on drawings
- Written price once the design is agreed
- Building control sign-off at the end
Prefer to talk? Call 0800 088 6341 or .
Book a free site visit
Tell us a little about the project and we will arrange a time.