house-extension.uk

Flat roof extensions for homes in Ryde

Planning a flat roof extension in Ryde? We survey the house, work out the planning route, draw the design and build it, so you deal with one team from the first visit to the completion certificate.

  • Guide price in RydeFrom £23,500 inc VAT
  • PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
  • Build time10–16 weeks on site
  • Postcode districtsPO33
Flat roof of an extension with a membrane finish, a roof lantern and flat rooflights

Planning rules that apply in Ryde

In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.

The planning position for a specific Ryde address depends on its history and any designations, which is why we check it at the first visit.

Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.

Applications are decided by the local planning authority (your district, borough or unitary council).

Is a flat roof extension right for your house?

  • Homeowners who want maximum light from above
  • Extensions under first-floor windows where a pitch will not fit
  • Modern and 1930s onwards houses

How much does a flat roof extension cost in Ryde?

Prices below are for Ryde, using the South East England factor of ×1.12. They are guide ranges including VAT for the build only, not a quote.

Typical rates in Ryde: £1,960 to £3,750 per m² including VAT, depending on specification.

SizeEssentialStandardPremium
3 m × 4 m
12 m²
£23,500 – £28,000£27,500 – £35,000£34,500 – £45,500
4 m × 5 m
20 m²
£39,000 – £46,000£45,500 – £58,500£58,000 – £75,500
5 m × 6 m
30 m²
£58,500 – £69,000£68,500 – £87,500£87,000 – £113,000

For a figure based on your own dimensions, use our guide-price tool.

Working in Ryde

Across PO33, we can visit, measure and advise. Neighbouring towns we cover include Sandown (5 miles), Newport, Isle of Wight (6 miles), Cowes (6 miles).

In the South East, plenty of houses have already been extended once, which makes checking the remaining permitted development allowance an important early step.

From first visit to completion

Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.

  1. Free site visit

    A designer visits, takes measurements and photos, and discusses layouts, budget and timing with you.

  2. Design and approvals

    We draw the design, agree it with you and handle planning or permitted development checks and building regulations.

  3. Fixed written price

    With the design and specification agreed, you get a fixed written price and a start date.

  4. Build and sign-off

    Work is carried out to the agreed programme, inspected by building control and signed off at the end.

Your questions about a flat roof extension in Ryde

Do you cover all of Ryde?

Yes. We cover Ryde and the surrounding parts of Isle of Wight. Site visits are free and there is no obligation.

Can I see a price before committing to anything?

Yes. The guide prices on this page are adjusted for Ryde, and the guide-price tool gives a range for your own size. After the survey you get a written price before anything is agreed.

Who do I contract with for a flat roof extension in Ryde?

Your contract is with S&K Property Investments and Improvement Ltd, which designs and manages the project and the build teams who carry it out.

Are flat roof extensions cheaper?

Usually slightly, because there is less roof structure and no tiles. Our guide range is about £1,960 to £3,750 per m² including VAT.

Can I walk on a flat roof extension?

Only for maintenance unless it is designed as a terrace. A roof terrace or balcony needs planning permission and a different structure.

Book a free site visit in Ryde

We will measure up, check the planning position and give you honest guide figures.

  • Free, no-obligation site visit
  • Planning route checked before you spend on drawings
  • Written price once the design is agreed
  • Building control sign-off at the end

Prefer to talk? Call 0800 088 6341 or .

Book a free site visit

Tell us a little about the project and we will arrange a time.

Please enter a valid UK postcode.
Please choose an option.
Please enter your name.
Please enter a phone number.
Please enter a valid email.

We use your details only to reply to this enquiry and prepare your quote. Privacy notice.

Call usGet a quote