house-extension.uk

Flat roof extensions across Billingham

A flat roof extension in Billingham starts with the right design and the right approval route. We take care of both, then build it with our own project management.

  • Guide price in BillinghamFrom £19,000 inc VAT
  • PlanningOften permitted development (3–4 m), or prior approval up to 6–8 m
  • Build time10–16 weeks on site
  • Postcode districtsTS18, TS19, TS20, TS22, TS23
Flat roof of an extension with a membrane finish, a roof lantern and flat rooflights

What is included

  • Parapets or edge trims and flashings to the house
  • Lanterns or rooflights with upstands
  • Falls and outlets designed to drain properly
  • Warm-roof design with insulation above the deck

Height is often what decides a flat roof. Under first-floor windows, a pitched roof may not fit at all; a flat roof keeps the extension low while still giving a good ceiling height inside.

Will the council need to approve it?

In England a single-storey rear extension can usually go up to 3 m beyond the original rear wall of a semi-detached or terraced house, or 4 m on a detached house, without a planning application, provided it is no more than 4 m high, keeps eaves to 3 m within 2 m of a boundary and, with other buildings, covers no more than half the land around the original house. The larger home extension prior approval scheme raises those depths to 6 m and 8 m, with neighbours notified and a 42-day decision.

Homes in conservation areas, national parks, National Landscapes (formerly AONBs), the Broads and World Heritage Sites have tighter rules, so we always check the property's status and planning history before design starts.

Building regulations approval is separate from planning. In England you can use the council's building control team or a registered building control approver; a full plans application gets the drawings checked before work starts, and the inspector signs the work off with a completion certificate.

Building over or within 3 m of a public sewer needs the water company's consent, usually through a build-over agreement, before the foundations go in.

Applications are decided by the local planning authority (your district, borough or unitary council).

Working in Billingham

Our survey diary covers Billingham, including TS18, TS19, TS20, TS22, TS23. Neighbouring towns we cover include Stockton-on-Tees (2 miles), Thornaby-on-Tees (4 miles), Yarm (6 miles), Hartlepool (7 miles).

For homes towards North Yorkshire, Middlesbrough is around 2 miles away. The North East has many brick terraces, colliery-era housing and post-war semis, with rear extensions and kitchen extensions the most common requests.

Flat roof extension prices in Billingham

Labour and material costs vary across the UK, so for Billingham we use our North East England factor (×0.91). The ranges include VAT and exclude design, structural and council fees.

Typical rates in Billingham: £1,590 to £3,050 per m² including VAT, depending on specification.

SizeEssentialStandardPremium
3 m × 4 m
12 m²
£19,000 – £22,500£22,000 – £28,500£28,000 – £37,000
4 m × 5 m
20 m²
£31,500 – £37,500£37,000 – £47,500£47,000 – £61,000
5 m × 6 m
30 m²
£47,500 – £56,000£55,500 – £71,000£70,500 – £91,500

Want a range for your exact size? The guide-price tool takes about a minute.

From first visit to completion

Site visits are free and there is no obligation. Where drawings are needed, the design stage is priced in writing before it starts.

  1. Free site visit

    We visit your Billingham home, measure up, talk through what you want and check the planning position.

  2. Design and approvals

    We draw the design, agree it with you and handle planning or permitted development checks and building regulations.

  3. Fixed written price

    You receive a written, itemised price and programme. Nothing starts until you are happy with it.

  4. Build and sign-off

    The build is managed from start to finish, inspected at each stage and signed off on completion.

Your questions about a flat roof extension in Billingham

How long does a flat roof extension take to build in Billingham?

On site, typically 10 to 16 weeks once approvals are in place. Before that, allow 4–12 weeks design and approvals.

Who do I contract with for a flat roof extension in Billingham?

Your contract is with S&K Property Investments and Improvement Ltd, which designs and manages the project and the build teams who carry it out.

Will my neighbours in Billingham be involved?

If a planning application or prior approval is needed, the council notifies neighbours. If the work is on or near a shared boundary, party wall notices may also be needed.

Are flat roof extensions cheaper?

Usually slightly, because there is less roof structure and no tiles. Our guide range is about £1,590 to £3,050 per m² including VAT.

Can I walk on a flat roof extension?

Only for maintenance unless it is designed as a terrace. A roof terrace or balcony needs planning permission and a different structure.

Book a free site visit in Billingham

We will measure up, check the planning position and give you honest guide figures.

  • Free, no-obligation site visit
  • Planning route checked before you spend on drawings
  • Written price once the design is agreed
  • Building control sign-off at the end

Prefer to talk? Call 0800 088 6341 or .

Book a free site visit

Tell us a little about the project and we will arrange a time.

Please enter a valid UK postcode.
Please choose an option.
Please enter your name.
Please enter a phone number.
Please enter a valid email.

We use your details only to reply to this enquiry and prepare your quote. Privacy notice.

Call usGet a quote